What does TPMS mean?
TPMS stands for Tire Pressure Monitoring System.
It is a safety feature that is standard in most newer vehicles. The system uses sensors to monitor the air pressure in your tires and alerts you when the pressure gets too low.
Low tire pressure can cause uneven wear. It can decrease your fuel efficiency and potentially cause dangerous blowouts.
TPMS can also help you extend the life of your tires by letting you know when it is time to add air. While TPMS is a great safety feature, it does require some basic maintenance.
You will need to regularly check the pressure in your tires and make sure that the sensors are working properly. However, even with this small amount of work, TPMS can help keep you and your family safe on the road.
Table of Contents
How Does A TPMS Sensor Work?
A tire pressure monitoring system is a device mounted onto the wheel. It continuously monitors the pressure inside the tires.
There are two different types of systems: direct and indirect. Direct TPMS sensors measure the air pressure inside the tire by using a sensor. The sensor then sends this information wirelessly to a receiver inside the car.
Indirect TPMS sensors measure the rotational speed of each tire and then compare it to the others. If one tire is rotating at a different speed, it means that there is less air pressure in that tire. These systems are less accurate than direct TPMS sensors, but they are also less expensive.
Why TPMS Is Mandatory?
It is a mandatory system in most vehicles, and for good reason. First of all, it helps to improve fuel economy by ensuring that your tires are properly inflated. It helps to extend the life of your tires by preventing them from becoming overloaded. Finally, it enhances safety by providing you with early warnings about potential tire problems.
With so many benefits, it’s no wonder that TPMS is required in most vehicles!
Can You Drive Your Car With TPMS Light On?
The TPMS light on your car’s dashboard is designed to alert you when your tires are low on air. While it’s okay to drive with this light on if your tire pressure is low but not critical, it’s not advisable. Low tire pressure can reduce fuel efficiency and increase the risk of a blowout.
If you’re driving with the TPMS light on, be sure to stop at the next gas station and check your tire pressure. If the light is still on after you’ve inflated your tires, there may be a problem with the TPMS system itself. In this case, it’s best to consult a mechanic for further assistance.
How To Install TPMS?
All newer vehicles come equipped with TPMS from the factory. Older vehicles often need to have it installed aftermarket.
The good news is that installing TPMS is a relatively easy process that can be done by most do-it-yourselfers.
The first step is to buy a TPMS kit that is compatible with your vehicle.
Once you have the kit, follow the instructions to install the sensor in each of your tires. In most cases, you will need to use a special tool to remove the tire valve stem cap and then screw on the sensor.
The last step is to activate the system by driving around for a few minutes so that the sensors can calibrate themselves. By following these simple steps, you can ensure that your vehicle has an effective tire pressure monitoring system.
How To Reset A TPMS?
If you get a warning light on your dash telling you that your TPMS is activated, it’s important to take action as quickly as possible.
The first step is to check the air pressure in all four tires and inflate them as needed. If the problem persists, you may need to reset the system.
The process for resetting a TPMS varies depending on the make and model of your vehicle, so it’s best to consult your owner’s manual.
In most cases, it involves holding down a button on the dash for a few seconds. Once the system is reset, you should be able to continue driving without any further issues.
TPMS Relearn Tool
While many dealerships and repair shops have the necessary tools to do this, it can be expensive to keep up with the latest technology.
A TPMS relearn tool allows a garage or workshop to offer this service at a much lower cost. The tool connects to the vehicle’s OBD-II port and uses a series of button presses and menu selections to relearn the TPMS sensor IDs.
This process takes only a few minutes, and it can save you a significant amount of money. As a result, a TPMS relearn tool is an essential piece of equipment for any garage or workshop that wants to stay competitive.
Tire Pressure Monitoring System For RV
The system is typically installed at the factory, but you can also add it as an aftermarket upgrade.
TPMS Sensor Replacement Cost
The sensors that make up a TPMS can be delicate, and they occasionally need to be replaced. Fortunately, there are a few different options for those looking to replace their TPMS sensors. The cost of a new sensor will depend on the make and model of the car, but it typically ranges from $50 to $100. Now if you add the labor it can cost you up to $200.